Digi one sp serial ethernet

Launch the Setup Wizard dgcfgwiz. NOTE: If you do not see your device in the list, click! Select the radio button next to Outgoing Connection. In this case we will choose TCP. Under the Automatically establish TCP connections, specify your connection requirements. You will need to enter: A. Description: Give a name to your setup. Use the following chart to interpret the LEDS:. If you are unable to communicate with the Digi unit over the network, try the following: 1.

Make sure you are not behind a firewall or running any third party firewall software on your PC. Make sure Internet Connection Firewall is not enabled in Windows. Ping the IP address: ping. If you do not receive ping responses, please confirm the network settings on the unit match up with your network environment by logging in directly to one of the serial ports.

This can be done by connecting a PC with terminal emulation software such as Hyperterminal , or by attaching a dumb terminal. A crossover null modem cable will be necessary.

If you are applying a static IP address, make sure dhcp is set to off. Apply any other network settings needed in your environment such as, domain, gateway and name server information. A reboot may be required. Users can IP enable a broad range of serial devices, as well as link two industrial devices. It is ideal for device management applications requiring specific industry protocol support. Digi One IAP supports a variety of serial and Ethernet protocols, allowing users to bridge serial and Ethernet devices, or both.

Multi-master access allows multiple masters to communicate with a single slave across protocols.