The last setting stored by key will be. Reception automatically activated from ignition To set time, refer to the Owner's key position 1. Manual for the vehicle. Selecting a reception range 16 Overview Selecting a station by frequency Settings CD Select "manual". Press or hold down. Set the frequency with. Selecting a reception range Press or hold down. Radio waves — medium wave, long Every actuation changes the wave and short wave — offer a wide frequency in specifically defined range of reception, because the broad- increments.
However, because FM transmissions rely on line- of-sight broadcast waves, their effec- tive reception range is limited. Select the reception range.
Switch on the RDS with. Settings the display after the RDS signals 2. Reception However, the reception of RDS data is The scan mode is stopped as soon only possible under favorable reception as a station is found.
If there is weak or inter- rupted reception, it can take quite a while before the transmitter name Switch off the RDS with appears in the display.
The scan function will be interrupted, the selected station will be retained. Overview program PTY , e. Settings trophe warnings. For every change of station, or if the station changes the program type, the. Reception type will appear automatically for a few seconds in the display. Select the reception range with 1. Select the station, refer to pages 16 2.
Select the stored station with ranges, refer to page Store stations with Press the desired key The memory spaces of the indi- vidual reception ranges are distributed among the memory levels Press and hold the desired key The station The station buttons are each multiply has been stored. The memory level and the selected key number will appear in the left of Select the reception range with the display, e.
Each time you tap, you can switch between the AM or FM memory levels. The selected memory level will appear in the left of the display. Overview access to the strongest station in the area while you are doing long-distance driving. The 6 currently strongest stations are auto- matically stored and the station stored under station key 1 is then tuned into.
Press repeatedly until the mode display switches over to the desired audio source CD changer or CD. Settings Random Play Insert the CD into the CD slot with somewhat and the unit switches over to is demonstrating a mechanical defect. CD changer or radio Display indication: or switch the unit off, refer to page 10 or If there is already a CD in the CD slot switch to the radio or CD changer with CD shown in display : Start up the playback with Press repeatedly until the mode display switches over to the desired audio Press repeatedly until "TR" appears in source radio or CD changer.
The sound output changes directly or Playback begins after a few seconds with the CD magazine loaded to from the point of the last interruption. Selecting the direction of play cally played one after the other for a.
Overview brief period. Press repeatedly until you get to the desired track. Press and hold the key. The tracks 1. Start the play can be heard, but the quality is The CD will start playing at the track distorted. Display, e. Settings release the key. The CD will start playing from the point selected. Select the track. Reception The scan function will be interrupted, and will begin playing again starting at the point where it was interrupted.
Start Random Play with. Thus, if you want, you can skip a track you do not want to listen to. The random play function will be inter- rupted, and will begin playing again starting at the point where it was inter- rupted. Overview compartment. Slide the flap to the right. Settings them from the CD magazine, hold them only at the edge. Do not touch the 2. With the arrow pointing toward the reflective side of the CD from which the CD changer, push the CD magazine signal is scanned.
The CD compartments in the changer 3. Close the flap. Reception 2. Press the key have the same numbers as the CD selector keys on the radio. Unloading: The magazine will slide out and can As shown in the illustration, pull out the then be removed. Playing slide desired and remove the CD. It is not recommended that you play CD singles with an adapter. The CDs or the adapter could jam. Suitable magazines for CD singles can be obtained from shops.
Operation outside focusing lens to fog over and prevent laser product. Even if the unit has been switched off, it Do not remove the cover from the should only be exposed to tempera- housing. Do not operate the unit tures ranging from —13 7 —25 6 to with a damaged cover. Repair or maintenance work must only be carried out by qualified service experts. As soon as you begin talking on the phone or accept a call, the radio switches to mute. Setting the speed-dependent volume To compensate for increasing noise in the passenger compartment with increased vehicle speed, your unit is equipped with a speed-dependent volume control Speed Volume.
This function will increase volume as speed likewise increases. You can set the volume increase in 6 levels. The higher the level you choose, the greater the increase in volume. Call up the current setting Press and hold the key. Select the level Press or keep pressed down. The selected level will be indicated in the display 3.
Leave the mode display Reset the setting The speed-dependent volume can be reset to the midrange setting. Reset the setting The speed-dependent volume will be re-set to level 3. The sound setting for bass and treble is source-dependent, i. Changing the audio source will call up the last sound setting used for this particular audio source. Page 13 of 38 12n Setting the sound quality Changing the sound setting 1. Select a different sound setting Treble, Fader or Balance if neces- sary Press repeatedly until the desired operating display is reached.
Change the desired sound setting Press or hold down until the desired setting comes up. All settings are reset. With the time displayed, the current settings can no longer be seen. For your listening enjoyment. Online Version for Part No. Previous Page.
Next Page. For bmw z3 roadster bmw z3 coupe bmw z3 m roadster bmw z3 m coupe 14 pages. Page 2 Online Version for Part No. In addition, we recommend that you read the instructions for using the car radio in the vehicle Owner's Manual. In it, you will receive helpful information for reception and playing quality.
Order no. Page 7 5 Indicator lamp for anti-theft protection 6 Function key for radio and CD modes 7 Station keys for the radio mode. CD direct selection keys in the CD changer mode. To select the other sound quality set- tings, press the respective center key.
Press left briefly.
0コメント